Name | Description |
 | 5000WB Water Proofer | Foxfire 5000WB is a one-component, VOC compliant, penetrating water repellent which contains a proprietary modified silane/siloxane. This water-based silane/siloxane penetrates most masonry and concrete pores and capillaries up to ¼ inch or more depending on surface porosity and moisture content at the time of application. Foxfire 5000WB is a low odor and environmentally friendly with a VOC content of less than 37 g/L. |
 | Efflorescence Remover Foxfire | Efflorescence Remover |
 | P-1007 Concrete Sealer Foxfire | P-1007 Concrete Sealer Foxfire reacts with free calcium hydroxide in the concrete forming a silica hydrogel that fills the capillaries within the matrix. This hydrogel waterproofs and seals the substrate after all materials harmful to the concrete are removed. This process could take up to thirty days or longer, depending on the chloride and acidic residual concentration within the capillaries. |
 | Anti Graffiti Coating Stain Repellent | Foxfire Anti Graffiti and Stain Repellent is clear, penetrating, breathable, VOC compliant, water, oil and graffiti resistant treatment for concrete, porous tile, paving, grout, some natural stone and other building materials. Foxfire Stain Repellent penetrates the surface and bonds chemically into the substrate, resulting in long term protection by reducing the ingress of water-borne and oil based contaminants into the surface. |
 | Foxfire P-1007 tests | Foxfire P-1007 tests |
 | Thermal Paint with Ceramic Spheres,beads, infused | Thermal paint - Eco-Cool is a financially prudent choice compared with alternative products, the coating’s capability to reduce energy consumption by as much as 40%, especially during peak hours, will generate a dependable return on investment throughout the lifetime of the coating. Eco-Cool Roof 5000 is tested and proven to be a highly effective cool roofing material. The coating’s performance results from the use of 100% pure elastomeric resins and a proprietary blend of hollow ceramic micro-beads. Eco-Cool Roof actively works to dissipate solar energy that is often absorbed through structural roofs during daytime hours. The coating’s surface reflects nearly ninety percent (90%) of solar energy and prevents the absorption of 86% of infrared radiant heat, emitting it back into atmosphere and away from the building’s interior. |
 | 3M Fasara Window Film Tint | 3M Fasara Interior Designer Films provide an innovative way to create a serene appearance. Fasara films simulate the appearance of frosted glass without the cost of etched glass. When applied to glass these decorative films create beautiful privacy screens and architectural statements. Filtering out 99% of the UV light, Fasara films reduce fading, protect valuables and are an excellent way to manage and divide interior spaces. Fasara films are available in many different textures and patterns to suite interior glass partitions or the inside surface of windows. Decorative window films can be used to achieve a more dynamic aesthetic or a more private atmosphere. Best of all when the styles change you can update the look by simply replacing the film and not the window. Common applications used but are not limited to: Glass Partitions Conference Rooms Entry Doors Glass Table Tops Residential Settings Lobbies Offices |
 | 3M Safety Glass shatter proof bullet proof Las Vegas | With 3M™ Safety and Security Window Films your windows can be transformed from your weakest link to a source of strength, helping to protect your home and your family from threats such as break-ins and severe weather events like hurricanes. 3M Safety and Security Window Films are designed to help hold the glass fragments together, reducing potential injury from flying glass during severe weather. Because these films help hold the glass together, a stronger barrier is created, slowing down criminals to the point where they may choose to flee for an easier target. 3M Safety and Security Window Films are available in clear, safety-only versions, or as a combination film with both sun control & safety features. |
 | 3M Safety Glass | With 3M™ Safety and Security Window Films your windows can be transformed from your weakest link to a source of strength, helping to protect your home and your family from threats such as break -ins and severe weather events like hurricanes. 3M Safety and Security Window Films are designed to help hold the glass fragments together, reducing potential injury from flying glass during severe weather. Because these films help hold the glass together, a stronger barrier is created, slowing down criminals to the point where they may choose to flee for an easier target. 3M Safety and Security Window Films are available in clear, safety-only versions, or as a combination film with both sun control & safety features. |
 | 3M Ultra S600 Safety Film ASTM Results | 3M Ultra S600 Safety Film ASTM Results |
 | 3M Forced Entry Statistics | Forced Entry Statistics How 3M film protects your family |
 | 3M film tested against laminated glass | 3M film tested against laminated glass |
 | 3M Ultra S600 Safety Glass | Premium tear resistant safety and security window film utilizing microlayered film technology Optically clear, 6-mil (0.15 mm) thick film for application to interior glass surface Provides shatter resistance to protect from broken glass hazards caused by seismic activity, spontaneous glass breakage, and other impact events Broad range of application use, including bomb blast mitigation, windstorm protection, safety glazing, and deterring smash & grab attempts and break & entry events Can be combined with 3M Impact Protection Attachment systems for additional safety and security Exhibits strong adhesion to glass and shock absorbing properties Protective hardcoat provides scratch resistance and durability Protects from the harmful effects of UV light and reduces fading of interior furnishings |
 | Tile& Concrete Safety Coating | Impregnating safety coating densifyes and leaves the surface co-efficiency of friction higher when wet. |
 | Anti Smoke Smell Technology | Our Anti-Smoke Smell technology works on a cellular level and disrupts the growth as well as the reproduction of more micro-organisms. This product damages the protein, cell membrane, DNA and internal systems of the microbe. Once infused onto a surface, this Anti-Smoke Smell Technology will start to work as soon as any micro-organism comes into contact with the coated and protected surface. Wonderful remediation of lingering Pot smells. |
 | Monofoil M1 MSDS Antimicrobial Kills Viruses | The MonoFoil active ingredient (A.I.) in aqueous solution is known to have high antimicrobial activity. In water, the A.I., 3-(trihydroxysilyl) propyldimethyloctadecyl ammonium chloride will hydrolyze into a silane triol. The ability of this molecule to kill virus, bacteria in solution is high (MIC Avian Influenza ≥ 5.5 log10). As this molecule reacts with receptive surfaces, the ability for it to orient into subsequent monolayers leads to the formation of a covalently bound, very potent durable antimicrobial. The mode of action of the MonoFoil surface bound polymer is directed specifically at the inner membrane of the cell. This cellular membrane is fluid. The phosphorlipids that make up the backbone of the membrane are in constant motion. It is this fluidity that allows for the trans- port of food and energy throughout the cell and is responsible for the entire integrity of the organism itself. If this membrane fluidity is disrupted, the cell will die. As the hydrolyzed A.I. reacts with the surface, it transforms from a silane triol monomer (found in solution) to a covalently linked polymer matrix. It is only in this polymer matrix that full durable antimicrobial activity is obtained. As the bacteria, virus or fungi contact the polymer matrix, the MonoFoil polymer integrates into the membrane. A one micron cell organism contacts a treated surface and is exposed to approximately 25,000 molecules of the A.I. concentrated at a single site. It is this concentrated attack that disrupts the fluidity of the membrane and ruptures the cell. In solution, this concentrated attack on the membrane by the A.I. cannot happen due to the lack of matrix formation and overall concentration of the active ingredient. |
 | Monofoil M1, Face Masks, Antimicrobial Kills Viruses | The MonoFoil active ingredient (A.I.) in aqueous solution is known to have high antimicrobial activity. In water, the A.I., 3-(trihydroxysilyl) propyldimethyloctadecyl ammonium chloride will hydrolyze into a silane triol. The ability of this molecule to kill virus, bacteria in solution is high (MIC Avian Influenza ≥ 5.5 log10). As this molecule reacts with receptive surfaces, the ability for it to orient into subsequent monolayers leads to the formation of a covalently bound, very potent durable antimicrobial. The mode of action of the MonoFoil surface bound polymer is directed specifically at the inner membrane of the cell. This cellular membrane is fluid. The phosphorlipids that make up the backbone of the membrane are in constant motion. It is this fluidity that allows for the trans- port of food and energy throughout the cell and is responsible for the entire integrity of the organism itself. If this membrane fluidity is disrupted, the cell will die. As the hydrolyzed A.I. reacts with the surface, it transforms from a silane triol monomer (found in solution) to a covalently linked polymer matrix. It is only in this polymer matrix that full durable antimicrobial activity is obtained. As the bacteria, virus or fungi contact the polymer matrix, the MonoFoil polymer integrates into the membrane. A one micron cell organism contacts a treated surface and is exposed to approximately 25,000 molecules of the A.I. concentrated at a single site. It is this concentrated attack that disrupts the fluidity of the membrane and ruptures the cell. In solution, this concentrated attack on the membrane by the A.I. cannot happen due to the lack of matrix formation and overall concentration of the active ingredient. |
 | Monofoil M1 EPA approved Anti Virus | The MonoFoil active ingredient (A.I.) in aqueous solution is known to have weak antimicrobial activity. In water, the A.I., 3-(trimethoxysilyl) propyl- dimethyloctadecyl ammonium chloride will hydrolyze into a silane triol. The ability of this molecule to kill bacteria in solution is limited (MIC E.coli >1000 ppm). As this molecule reacts with receptive surfaces, the ability for it to orient into subsequent monolayers leads to the formation of a covalently bound, very potent antimicrobial. The mode of action of the MonoFoil surface bound polymer is directed specifically at the inner membrane of the cell. This cellular membrane is fluid. The phosphorlipids that make up the backbone of the membrane are in constant motion. It is this fluidity that allows for the transport of food and energy throughout the cell and is responsible for the entire integrity of the organism itself. If this membrane fluidity is disrupted, the cell will die. As the hydrolyzed A.I. reacts with the surface, it transforms from a silane triol monomer (found in solution) to a covalently linked polymer matrix. It is only in this polymer matrix that full antimicrobial activity is obtained. As the bacteria or fungi contact the polymer matrix, the MonoFoil polymer integrates into the membrane. A one micron cell organism contacts a treated surface and is exposed to approximately 25,000 molecules of the A.I. concentrated at a single site. It is this concentrated attack that disrupts the fluidity of the membrane and ruptures the cell. In solution, this concentrated attack on the membrane by the A.I. cannot happen due to the lack of matrix formation and overall concentration of the active ingredient. This is shown graphically below: |
 | NFL Monofoil M1 Anti Virus Las Vegas Nevada EPA Approved Registered Kills Viruses Test Results | HIV type 1 30 seconds Rotavirus 30 seconds Human Coronavirus 30 seconds Avian Influenza A 30 seconds Influenza A 30 seconds Influenza A (H1N1) 30 seconds Swine Influenza A (H1N1) 30 seconds Respiratory Syncytial Virus 30 seconds Adenovirus Type 2 30 seconds Herpes Simplex Type 1 60 seconds Murine Norovirus 60 seconds Norovirus 60 seconds Rhinovirus 60 seconds Polio Type 2 60 seconds Hepatitis B Virus (HBV) 60 seconds Hepatitis C Virus (HCV) 60 seconds |
 | Monofoil D Tech Data | VIRUCIDAL TEST METHODS: The US EPA accepts carrier based Virucidal test methods to support Virucidal activity of a disinfectant, which are modifications of the AOAC Use Dilution Test or the AOAC Germicidal Spray Products Test. Each virus claimed must be tested in an appropriate test system using a cell line which supports the growth of the virus. The method as outlined in the EPA Disinfectant Technical Science section (DIS-TSS 07) states: To simulate in-use conditions, the specific virus to be treated must be inoculated onto hard surfaces, allowed to dry, and then treated with the product according to the directions for use on the product label. One surface for each of two different batches of disinfectant must be tested against a recoverable virus titer of at least 104 from the test surface (petri dish, glass slide, steel cylinder, etc.) for a specified exposure period at room temperature. The virus is then assayed by an appropriate virological technique |
 | Monofoil Medical VA Information | MEDICAL USE MonoFoil Antimicrobial is the only mechanically bound, non-leaching additive that provides unmatched safety and performance, at a competitive price. MonoFoil Antimicrobial has a new approach to eliminating microbial cells. MonoFoil physically punctures the cell membrane with its molecular |
 | Monofoil Comparison to Silver | MonoFoil Antimicrobial creates a Non-Toxic, Non-Leaching, Non-Staining, GREEN, invisible Antimicrobial barrier. Once dried on the surface MonoFoil will not wash off even after being cleaned by another disinfectant. It can be applied by sponge, spray, mop, fog or dip. This commercial level grade product is currently utilized in Hospitals, Universities, Medical laboratories, Janitorial Services, and the United States Military. MonoFoil™ Antimicrobial is a natural molecule that is embedded in or coated on products. MonoFoil™ specifically creates a mechanical barrier, which prohibits the growth of a broad range of microorganisms. As a result, MonoFoil™ enables virtually every surface (treated article) to prevent the growth and over proliferation of many offending microbes long term! MonoFoil™ Technology will eliminate pathogenic bacteria such as MRSA, STAPH and E. Coli. It will also form a permanent barrier to inhibit the growth of pathogenic bacteria and other microbes such as fungi, algae, yeast and viruses. The attached documents include a list of bacteria, fungi, algae and viruses that MonoFoil Antimicrobial technology will eliminate. What sets Monofoil apart is simple, with one application, Monofoil provides protection against a vast array of germs, such as flu, colds, hepatitis, HIV, including “super bug” MRSA, for 30 days. (Even in the laundry application). It is safe to touch, and safe for use on food surfaces, and is even being tested for wound care applications. |
 | Monofoil VS NFL MRSA | Tested & proven effective against illnesscausing microorganisms such as STAPH, MRSA, H1N1, E.COLI, HIV, & NOROVIRUS |
 | Monofoil X Safety Data Sheet SDS 2020 | 3 (trihydroxysilyl) propoyldimethyloctadecyl ammonium chloride 27668-52-6 3.6 |
 | Monofoil M SDS Safety Data Sheet | 3 (trihydroxysilyl) propoyldimethyloctadecyl ammonium chloride 27668-52-6 3.6 |
 | Monofoil D SDS Safety Data Sheet | 3 (trihydroxysilyl) propoyldimethyloctadecyl ammonium chloride 27668-52-6 3.6 |
 | Monofoil Efficacy Test Results List of Viruses Monofoil Kills | Test Organism Sample Titer Reduction †Adenovirus Type 5 A B >3.0 log10 >3.3 log10 *Avian Influenza A/Turkey/Wisconsin (ATCC VR-798) A B >5.5 log10 >5.5 log10 ‡Bovine Viral Diarrhea Virus (BVDV) A B 5.93 log10 5.93 log10 •Hepatitis B Virus (HBV) (Duck Hepatitis B Virus-DHBV) A B 4.68 log10 4.68 log10 ‡Hepatitis C Virus (HCV) (Bovine Viral Diarrhea Virus-BVDV) A B 5.93 log10 5.93 log10 †Herpes Simplex Type 1 (Sabin) A B 4.0 log10 4.0 log10 *Human Coronavirus (ATCC VR-740, strain 229E) A B >4.25 log10 >4.25 log10 *Human Immunodeficiency Virus, HIV-1, strain HTLV-IIIB, (associated with AIDS) A B >3.5 log10 >3.5 log10 †Influenza A2 (Japan 305/57) A B 7.5 log10 7.5 log10 *Norovirus A B 4.75 log10 >4.75 log10 *Newcastle Disease Virus (strain H.J. Roakin, 1946) A B >5.5 log10 >5.5 log10 *SARS associated Coronavirus (ZeptoMetrix) A B 4.03 log10 4.03 log10 †Vaccinia (Wyeth) A B 3.5 log10 3.5 log10 Conclusion: Under the conditions of this investigation, MONOFOIL® 1.3%Solution was virucidal for Adenovirus Type 5, Avian Influenza A/Turkey/Wisconsin, Bovine Viral Diarrhea Virus (BVDV), Hepatitis B Virus (HBV), Hepatitis C Virus (HCV), Herpes Simplex Type 1 (Sabin), Human Coronavirus, Human Immunodeficiency Virus (HIV-1), Influenza A2 (Japan 305/57), Laryngotracheitis, Newcastle Disease Virus, SARS associated Coronavirus and Vaccinia (Wyeth) according to criteria established by the U. S. Environ-mental Protection Agency for registration and labeling of a disinfectant product as a virucide. |